15 Jun
2020

How Packaging Affect OEE Metrics in Food Processors Manufacturing

As a manufacturer, you may be experiencing problems at the end of your packaging line. Here’s how these problems OEE manufacturing.

OEE
How Packaging Affect OEE Metrics in Food Processors Manufacturing

For most food processors, final packaging is one of the most important and, in many cases, one of the most problem-prone areas of the entire production process. The difficulties that arise during packaging are often due to the complexities of automating the multiple instances of transferring, handing off, filling, bagging, sealing, and packing required to convert the product into a sellable unit.  

Composition of a Typical Packaging Line

Most bagging and packaging operations include many of the following broad process steps:

  • Conveying, handling, accumulating, orienting, and positioning
  • Weighing, filling, and capping
  • Vacuum forming, sealing, taping, and gluing
  • Carton unfolding, folding, packing, unpacking, and sealing
  • Weighing, checkweighing, and metal detection
  • Coding, film wrapping, and labeling
  • Palletizing, depalletizing, strapping, moving, and warehousing

There are, of course, many other both standard and specially designed processes that could be included in the above list. Because of the variety and complexity of equipment, however, final packaging is often a processor’s greatest challenge. Nevertheless, Worximity’s Smart Factory Analytics system allows manufacturers to connect all these processes, consolidate performance data, and display a comprehensive picture of real-time package line performance. Results displayed on TileBoards allow employees to monitor activity and react to changes as they occur. 

Importance of OEE Manufacturing and Throughput

Throughput, described by Matt Nichol as "the average number of units being produced on a machine, line, unit, or plant over a specified period of time," is one of the most important metrics for gauging the effectiveness of packaging operations. Ensuring factory output can satisfy customer demands and expectations is critical to overall company performance and profitability. Throughput, therefore, is the primary measure of a company’s ability to meet customer demand.

For a company to achieve its required throughput targets, packaging lines must run effectively—and to track effectiveness, companies measure packaging line OEE. Problems across packaging processes, however, can lower OEE manufacturing values and threaten throughput and the delivery of finished products.  

Common Packaging Line Problems and Tips to Correct Them

1. Poor Packaging Design

It is critically important that all packaging materials are able to run on the plant’s packaging equipment. Although it may be attractive, a glass bottle with an odd shape may be tough to move through high-speed conveyors, transfer mechanisms, fillers, and packers. To ensure the most effective design is used, package designers should work closely with plant process engineers, line personnel, and equipment suppliers. 

2. Incorrect Films for Bagging, Wrapping, and Filling

Many types of films are used in packaging, including shrink wrap, overwrap, printed films, multilayer films, bags, envelopes, pouches, and others. Selecting films with characteristics that are compatible with film-handling equipment is critical. Film thicknesses are becoming thinner, and some equipment may have difficulty spooling, cutting, and sealing these films.

3. Running Out of Consumables  

Maintaining adequate supplies of consumables—film, tape, glue, labels, and other supply-type items—is essential for keeping the line moving. OEE manufacturing values depend on availability, which is the amount of planned run time compared to actual run time. If running out of consumable items causes the line to stop, this reduces the actual run time and lowers the OEE score.  

Work closely with suppliers to ensure an adequate quantity of consumables is on hand and staged to move to the line when needed.

4. Poor Integration of Systems, Equipment, and Controls

Careful planning is needed to ensure that the coordination of the numerous packaging line components is properly synchronized. Multiple operations, such as filling, measuring, sealing, packing, and palletizing, must seamlessly work together to transfer and move products through the packaging process. Minor line imbalances, differences in speeds and feeds, and off-speed transfers can cause jam-ups or leave operations without incoming material to process. Thorough training of line personnel, set-up technicians, and maintenance crews can help ensure timing, feeds, speeds, and equipment interfaces are correctly coordinated.  

5. Lack of Production Line Backup

When labeling and bagging lines are down, sellable products are not being produced.  If redundant equipment is available, it can be marshaled into service during extended downtime periods to keep production running. Often, the costs of extra equipment can be justified when compared to the costs of lost production.

How Worximity Can Help Improve Packaging and OEE Manufacturing

Whenever the bagging and labeling process is stopped, both throughput volumes and OEE scores are reduced. By analyzing OEE values in real time, manufacturers can quickly identify problem areas and take corrective actions.  Worximity Technology's Smart Factory analytics software is designed to provide real-time OEE tracking. Our TileConnect smart sensors are fastened to equipment and gather performance data as it happens. This data is sent to the cloud, where our Smart Factory analytics software calculates OEE and other KPIs. TileBoard’s dashboards display the factory’s throughput results. 

To see firsthand what Worximity’s Smart Factory analytics can do to improve your bagging and labeling process, request a demo and talk with one of our technical consultants.  

Want to learn more?
Download the ebook
Related blog articles

Related articles

Back to the blog
Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.
18
Dec 2023

An Example of How to Calculate OEE in Manufacturing

English
13
Jan 2020

Why You Should Consider Monitoring OEE On Multivac: Thermoforming Packaging Machines

English
21
Dec 2020

Ways to Analyze Real-Time OEE Data from a Remote Environment

English

Related articles

Back to the blog
Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.
20
Feb 2024

Comment les entreprises ont mis en oeuvre les 14 points de Deming dans le secteur manufacturier

Les 14 points de gestion de Deming ainsi que la suite d'outils de performance de Worximity stimulent l'amélioration et l'innovation dans le secteur manufacturier.

French
16
Feb 2024

Principales différences entre la fabrication discrète et la production par processus

Découvrez le rôle essentiel que joue votre logiciel dans la fabrication discrète et dans la production par processus.

French
23
Jan 2024

Optimisation des opérations à l'échelle de l'entreprise : analyse de données dans l'industrie manufacturière avec l’aide de Worximity

Découvrez comment Worximity transforme les opérations manufacturières en exploitant l'analyse des données en temps réel, apportant efficacité et innovation à l'Industrie 4.0 tout en responsabilisant les départements au-delà de la gestion de la production.

French